Bastu ventilation bauhaus

Hem / Hem & Hushåll / Bastu ventilation bauhaus

Sometimes the cooled air goes under the shelf seats, where it enters the pipe. Sometimes in the steam room there is only a heater, from which the air is heated, and the stove remains isolated.

The exhaust air enters the exhaust pipe at a small height above the floor or falls under it and enters a channel, the opening of which is also below the floor.

Keep this in mind. The air supply point is enclosed with a small podium approximately two bricks high. In the classic and most common version, this is exactly what happens.

  • The inflow enters the room at the place under the stove (in the floor or at the bottom of the wall) and heats up from it.
  • Warm air goes up and mixes with the steam.

    The length of the intermediate segment depends on the height of the ceiling more than all other parameters. The ventilation drawing is drawn in advance, sometimes they are chosen among standard solutions for each size.

    The word "bastu" is Swedish for sauna. The pipe should be raised above the roof by more than a meter, and the bottom should be placed just above the floor or under the shelf seats.

    A set with short insulated pipes, a tee, a TsAGI deflector, a retractable gate and everything is made of stainless steel - a good choice, but not ideal

    Let's look at the following kit for the exhaust ventilation part:

    • 3 or 4 pipes, 1.25 m long, 110 mm cross-section;
    • 2 channels of the same length, cross-section 180 mm;
    • tee with cover;
    • globular turbo deflector;
    • adapter from 110 mm to 180;
    • gate

    We will collect the elements one into the other.

    We make another sandwich - part of the system that will be above the roof.

    Cut out a hole in the roof. We insert another one of the same into the previously installed sandwich. The second should cover the plug. Stainless steel parts will last twice as long - up to 50 years, but galvanization better withstands pressure, bending and many other types of loads.

    Preparation of tools and materials

    We select the number of parts based on the height of the building.

    bastu ventilation bauhaus

    We will also talk about the advantages and disadvantages of bastu ventilation.

    Bastu works with a certain air circulation. To hide the tape, small dents and irregularities, we put on it cladding with imitation wood or brickwork. Due to the difference in height and draft in the ash pan, cold air will enter the furnace (combustion chamber) of the furnace, from where it will exit through the chimney.

    Most often, the ash pan is located in the recreation room, and the closed part of the furnace is sent to the steam room.

    Tell us about your steam room. The air supply from the street will be regulated by a rectangular butterfly valve.

    We also recommend reading our other article, where we talked in detail about the best schemes for organizing ventilation in a bath. Objects in such a steam room also heat up better.

    Other advantages of air exchange according to the bastu principle:

    • fresh air for heating comes from the street;
    • pleasant smell in the steam room;
    • no additional ventilation devices are needed;
    • more health benefits;
    • facilitated bath care;
    • large comfort zone in the steam room.

    The ventilation system based on the bast principle has three options for the operation of the exhaust duct.

    She is depicted here conditionally

    • A detailed ventilation scheme for bastu looks like this:

    1. Air through the supply channel enters the steam room from the street. Among the insulation materials, we choose either mineral/glass wool or polymer-based foam.

      We select the thickness of the thermal insulation, fix it with glue, secure it with tape or adhesive foil over as large an area as possible.We install a 180 mm pipe on the insulation, and the sandwich is ready.

      Then we insert an adapter from 110 mm to 180 mm into the finished part of the exhaust structure and secure it.

      The ceiling gradually cools down and begins to fall down. The air near the stove will heat up, then make a semicircle along the upper half of the steam room and the heavier and cooler air will descend first on the opposite side.Due to the difference in height and draft in the ash pan, cold air will enter the furnace (combustion chamber) of the stove, from where it will exit through the chimney.

      Most often, the ash pan is located in the rest room, and the closed part of the stove is directed to the steam room.

      The work will take a lot of time, but it will not be difficult if you know everything. Find out more about the principle of operation of this ventilation system and its components from our article.

      instagram viewer

      The content of the article:

      • Feature of ventilation bastu in the bath
        • Benefits of ventilation bastu
        • Disadvantages of the bastu ventilation system
      • Ways to increase ventilation power
      • Installation of ventilation system bastu
        • Preparation of tools and materials
        • Ventilation training
      • Conclusions and useful video on the topic

      Feature of ventilation bastu in the bath

      Bathhouses and saunas have steam rooms, and at different conditions they all need ventilation.

      We process its edges with sealant and fasten with large self-tapping screws.